|
 Simple
Green® Stencil and Misprint Cleaner is
specifically designed to remove all SMT solder pastes including Resin,
Water-Soluble, No-Clean, Lead and Lead-Free from stencils, screens, and
misprints.
Simple Green Stencil and Misprint Cleaner is exceptionally effective,
providing superior cleaning performance in unbelievably short cycle
times. In fact, test reports confirmed that Simple Green Stencil and
Misprint Cleaner removed 100% of all solder paste in less than half the
time of the leading competitor. And, unlike other chemicals that are
difficult to rinse, Simple Green Stencil and Misprint Cleaner is free
rinsing, allowing its use in rinse or rinse-less stencil cleaning
systems.
Simple Green Stencil and Misprint Cleaner cuts through tough, dried
on solder paste and flux residues. We’ve
found no other stencil cleaning product on the market that matches
Simple Green’s cleaning performance. Yet, it causes no harm to any of
the stencil’s construction materials such as the aluminum frame,
stainless steel or polyester screen and stainless steel, brass or nickel
metal etched foil.
The components of Simple Green Stencil and Misprint Cleaner are all
low-toxicity compounds and the product contains no “solvents”. This
leads to an excellent worker’s safety environment. A ll
of the components are biodegradable, so they won’t accumulate in the
environment. Simple Green Stencil and Misprint Cleaner meets or exceeds
current and reasonably anticipated VOC requirements (EPA, AQMD, SCAQMD).
It also contains no Clean Air Act Hazardous Air Pollutants (HAPs), nor
is it a RCRA hazardous waste in and of itself when disposed.
Simple Green Stencil and Misprint Cleaner is available in one gallon
(3.8 liter), five gallon (18.9
liter), and fifty five gallon (208 liter) containers for immersion
cleaning applications (such as ultrasonic) and also in a 32 ounce (0.95
liter) trigger spray for manual stencil cleaning applications.
|
