Graphic
Home
Contact Us
 

Trident is a fully automatic defluxing and cleanliness testing system designed to remove all flux and solder paste residues from post reflowed circuit assemblies.  Trident is capable of removing all flux types including Rosin, Water Soluble, and all No-Cleans.  Trident is uniquely capable of removing all eutectic and lead-free residues either separately or mixed in the same batch.

Trident is equipped with the multiple award winning Focus-Wash cleaning technology.  Focus-Wash directs more fluid flow to a concentrated area, resulting in greater impingement, even on densely populated, low standoff SMT assemblies.  Trident’s exclusive oscallating board rack and counter-rotating spray arms reduce shadowing by ensuring complete spray coverage.

Trident is equipped with real-time predictive cleanliness capabilities.  The on-board cleanliness tester automatically controls the cleaning process, ensuring a cleanliness level that equals or exceeds your programmed setting.  In many cases, Trident’s predictive cleanliness capability eliminates the need for off-line post defluxing cleanliness testing.

Trident is controlled by a powerful industrial computer running the exceptionally

 stable Windows CE platform.  A large graphic touch-screen provides an intuitive operator interface.  Operators may select program recipes from a drop-down list.  Authorized supervisors and administrators with password privileges have additional access to the recipe editor and administrative functions.  An on-board statistical process control (SPC) data logger automatically records vital process information such as cleanliness levels.  SPC data may be viewed locally on the display screen, exported onto a USB device, or viewed remotely on any network-connected PC.

Trident is equipped with a host of standard features such as stainless steel plumbing, pre-drain filtration system, stainless steel adjustable board rack, and much more.

Trident Automatic Defluxing and Cleanliness Testing System is available in six configurations:

Model Discharge Configuration
Trident I Low discharge
Trident I ZERO Zero discharge
 Trident II Low discharge
Trident II ZERO Zero discharge
Trident III Low Discharge
Trident III ZERO Zero Discharge
Trident Duo (two chambers) Low Discharge
Trident Trio (three chambers) Low Discharge
Trident Quad (four chambers) Low Discharge

Trident I:  Trident I is capable of removing all flux residues including Rosin, No-Clean, and Water Soluble.  Both lead and lead-free flux residues may be removed using Trident I.  Trident I is equipped with an automatic chemical injection system that automatically adds a programmable volume of defluxing chemical to the wash water.  Wash solution is heated automatically and sprayed onto the assemblies.  At the end of the wash cycle, the wash solution is directed through a stainless steel filter housing and drained from the machine.  Rinse water is then sprayed onto the assemblies until the desired cleanliness level is achieved.  All rinse water is directed through the pre-drain filtration system then sent to drain.  Assemblies are dried via the on-board convection and radiant forced air drying system.  Zero-Discharge evaporation system eliminates connection to a drain line.

Trident II:  Trident II is capable of removing all flux residues including Rosin, No-Clean, and Water Soluble.  Both lead and lead-free flux residues may be removed using Trident II. Trident II is equipped with a closed-loop wash solution recycling system.  Wash solution is heated automatically and sprayed on the assemblies.  At the end of the wash cycle, the wash solution is directed back to the wash solution holding tank for subsequent reuse.  Rinse water is then sprayed onto the assemblies until the desired cleanliness level is achieved.  All rinse water is directed through the pre-drain filtration system then sent to drain.  Assemblies are dried via the on-board convection and radiant forced air drying system.  An optional Zero-Discharge evaporation system eliminates connection to a drain line.

Trident III:  Trident III is capable of removing all flux residues including Rosin, No-Clean, and Water Soluble.  Both lead and lead-free flux residues may be removed using Trident III. Trident III is equipped with an automatic chemical injection system that automatically adds a programmable volume of defluxing chemical to the wash water.  Trident III is equipped with a closed-loop wash solution recycling system.  Wash solution is heated automatically and sprayed onto the assemblies.  At the end of the wash cycle, the wash solution is directed back to the wash solution holding tank for subsequent reuse.  Rinse water is then sprayed onto the assemblies until the desired cleanliness level is achieved.  All rinse water is directed through the pre-drain filtration system then sent to drain.  Assemblies are dried via the on-board convection and radiant forced air drying system.  Trident III is equipped with a host of standard features including programmable maintenance reminders, remote SPC viewing, SPC data USB export, and an built-in chemical management system.  An optional Zero-Discharge evaporation system eliminates connection to a drain line.

Require High Throughput?
Get out of Line and Get into Trident High-Yield

 

Trident High Yield Models
More throughput and process control than an inline defluxer
Lower acquisition and operating cost than an inline defluxer
More environmental responsible than an inline defluxer
Less floor-space than an inline defluxer

Trident is available in four throughput configurations.  Trident Duo, Trio, and Quad produce two, three, and four times (respectively) the throughput of a single-chambered Trident.

Trident Duo Trident Trio

The Trident High Yield models provide a cost effective alternative to inline defluxing systems.  While most inline defluxing systems consume and discharge as much as 5 gallons (19 liters) of deionized water PER MINUTE, Trident High-Yield defluxing systems use between 0.5 - 2 gallons (1.8 - 7.5 liters) per minute, a reduction of up to 60%.

Trident High-Yield defluxing systems are equipped with multiple (2 - 4) autonomous defluxing chambers.  Each chamber is controlled by a dedicated computer controller and may be operated with different defluxing chemistries for maximum flexibility.  Each defluxing chamber is equipped with independent cleanliness testing capabilities and recallable SPC data records.  Unlike any inline defluxing system, only Trident High-Yield models are capable of high throughput levels and built-in cleanliness testing.

Trident High Yield Through-put Estimates

Board Size (mm)
Hourly Throughput
Duo

Hourly Throughput
Trio

Hourly Throughput
Quad
127 x 127
224
336
448
203 x 203
112
168
224
304 x 304
56
84
112
457 x 457
56
84
112

> Back to Home


Finance Offers

from $ 945.00 per month
36 months OAC

Interested in a Live Presentation?

 

Meet Now

1

Obtain login from Aqueous Technologies by calling
+1 909.291.1120

2

Click "Meet Now" for live sales presentation!


Trident Series Knowledge Base

Product Catalog

Download
E-Learning Presentation

View

Video Presentation

View



"Trident Rollout
at Productronica"
Munich Germany
 
more


Display Screens
(click to enlarge)

Main Screen Recipe Editor
(password required)
Admin Screen
(password required)
Manual Control
(password required)


Aqueous Technologies' Automatic Defluxing Systems have won more major industry awards than
any other brand.
 


No Drain Available?
No Drain Allowed?
No Problem!

Tridents I, II, and III are available in a Zero-Discharge configuration.


with purchase of Chemical Subscription
North America Only

 

 
 

Aqueous Technologies Corporation  9055 Rancho Park Court, Rancho Cucamonga, CA 91730  +1 909.944.7771  Fax +1 909.944.7775

Copyright © 1992 - 2006 Aqueous Technologies Corporation.  All rights reserved.  Aqueous Technologies is a trademark of Aqueous Technologies Corporation