Stop sending solution to the drain! Turn your batch format cleaning system into a closed-loop (zero-discharge) configuration with the purchase of a rinse water recycling system from Aqueous Technologies.
Aqueous Technologies' Model RWR-2010 Rinse Water Recycler provides capture, filtration, re-deionization, and reuse of rinse water from Aqueous Technologies Trident-LD or other batch-format aqueous defluxing systems.
The RWR-2010 rinse water recycler is constructed with durable, corrosion-resistant welded polypropylene. A built-in stainless steel, high performance recirculation / filtration pump directs waste rinse water through dual particulate filters and carbon and resin media tanks. A user may obtain carbon and resin media tanks directly from Aqueous Technologies or through a media vendor of their choice.
The RWR-2010 rinse water recycler is equipped with both low and high level float switches which allow for automatic water replenishment and protection against run-dry operation. Dual pressure gauges monitor the condition of the two particulate filters. A built-in digital resistivity meter provides real-time monitoring and display of the actual cleanliness of the water.
| Features |
Description |
| Holding Tank |
30 Gallons |
| GPM Output |
3-5 GPM |
| Pump |
Stainless Steel 1HP, 110V Multistage Pump |
| Post-Filtration |
10 inch long, 5 micron filter cartridges |
| Resistivity Meter |
0-18 M-Ohm digital display |
| Control Panel |
Electrical enclosure with indicator lights and switches |
| Pressure Gauges |
Two (2) Liquid filled pressure gauges for monitoring pressures at filters |
| Connection |
• Return Line 3/4" FPT
• DI Supply Lines 3/4" FPT
• City Water 3/4" FPT
• Drain Line 3/4" FPT |
| Electrical |
110 volt, Single Phase, 20 amps |
| Physical Dimensions |
Width: 28" Depth: 38" Height: 50" |
|
|
|
 |
| |
|
